Profile Straightener
Category:
Keyword:
Product Details
Straightening process
The position of the roller is at an angle with the moving direction of the straightened product. Two or three large rollers are active pressure rollers, which rotate in the same direction with the action of the motor. Several small rollers on the other side are driven pressure rollers, which rotate by the friction force of the rotating round bar or pipe. In order to achieve the compression required by rollers for products, these small rollers can adjust their positions forward or backward at the same time or respectively. Generally, the more the number of rollers, the higher the precision of products after straightening. After the product is bitten by the roller, it will continuously move in a straight line or rotation, so that the product will bear various deformation such as compression, bending, flattening, and finally achieve the goal of straightening.
Operating Instructions
1、 Operating Steps
1. Before starting the machine, check whether the hydraulic oil of the hydraulic station, the gear oil of the reduction box and the transmission box are full.
2. Before starting the main motor, check and adjust the angle and adjust the working pressure of the hydraulic system.
3. Inject lubricating oil at each lubricating point, and check the operation of the mechanical transmission part to make it flexible.
4. Operators shall wear labor protection appliances and shall not leave or leave their posts after starting up.
5. After the oil temperature and oil pressure of the hydraulic station are stable, the upper straightening roll is lifted to the initial position.
6. Receive materials manually, and press down and clamp the upper straightening roll after sending the steel pipe through the third pair of straightening rolls.
7. Start the main motor, and the steel pipe will be straightened while rotating forward.
8. The motor stops, the straightening roll stops straightening, the upper straightening roll lifts, and the straightened steel pipe is sent out.
9. If reverse straightening is required, reverse the main engine through the reverse knob on the console for reverse straightening.
The main motor stops, the straightening roll stops straightening, and the steel pipe is returned to the starting position to repeat the next straightening program instruction.
11. After shutdown, turn off the main power supply and do not change the program controller at will.
ABOUT US
Guangdong Ludingwang Industrial Electric Furnace Equipment Co., Ltd.
Guangdong Ludingwang Industrial Electric Furnace Equipment Co., Ltd. (formerly Lida Machinery Electric Furnace Factory in Zhaoqing City, Guangdong Province) was founded in 1989. Located at the southern end of Heshan City, Guangdong Province, the southern gate of the motherland, it borders Siqian Town of Xinhui City, Gongyi Town of Taishan City, Shuikou Town of Kaiping City, and Yueshan Town of Kaiping City. There are more than 300 hardware and bathroom enterprises in the town, with an investment scale of 1 billion yuan, and a diversified industrial structure has gradually formed such as copper supply, hardware products, motorcycle parts manufacturing, stainless steel precision casting, and mechanical equipment manufacturing. There are 187 enterprises engaged in hardware and bathroom industry manufacturing, and 9 projects with over ten million yuan have been gathered.
LUDINGWANG
CUSTOMER CASE
Ludingwang is a private enterprise integrating production, research and development, and sales of hardware and bathroom machinery, induction heating equipment for industrial frequency furnaces, intermediate frequency furnaces, and copper finishing equipment.
Related Products
Round bar straightening machine
Jiangmen electric furnace accessories
Product Inquiry
BECOME THE PREFERRED BRAND OF FOUNDRY ENTERPRISES
Jiangmen Luding Wang electric furnace industrial Co., LTD
CONTACT
Add: No. 5 Water flow Collar, Jingxiang Village, Kaifeng Village Committee, Shuikou Town, Kaiping CityGuangdong, China
