What are the breakdowns and solutions of the shredder?
28,2022
With the increasing demand and mature development of metal shredder equipment in the market, more and more users begin to pay attention to the production efficiency and maintenance after production, rather than just the pre purchase of metal shredder equipment.
If the metal shredder is overloaded, the motor will be burned, which will make the metal shredder unable to work normally, and also bring trouble to users. You can test the current situation. The ambient temperature should not be too high. The reasonable choice of shredder motor can save costs for users and bring considerable economic benefits. If the main bearing temperature is too high. The oil may not be enough, and an appropriate amount of oil shall be added; If the grease is contaminated, replace the grease after cleaning the bearing; If the bearing is damaged, it needs to be replaced. If the processing capacity of the equipment is reduced or the power is insufficient. If the hydraulic coupler leaks, add a certain amount of No. 22 turbine oil or No. 6 hydraulic transmission oil. If the coupler is damaged, it needs to be replaced. If the feeding is uneven, adjust the feeding. The sensor protection system has failed. If the proximity switch is damaged or the wiring in the electric control cabinet is loose, it is necessary to replace the additional switch or wire according to the wiring diagram. If the discharge is too large. The broken teeth may be excessively worn, and then the broken teeth need to be replaced or laid; If the teeth of the equipment are worn or fall off, replace the teeth
Shredder
Related News
2022-10-10
2022-10-28
BECOME THE PREFERRED BRAND OF FOUNDRY ENTERPRISES
Jiangmen Luding Wang electric furnace industrial Co., LTD
CONTACT
Add: No. 5 Water flow Collar, Jingxiang Village, Kaifeng Village Committee, Shuikou Town, Kaiping CityGuangdong, China
